Poplar face and back, poplar or combi core, 18mm(13 ply+2 film), 12mm(9 ply+2 film) black film and brown film with ”Tiansen Timber” logo.

Surface: All face defects to be putty filled and sanded smooth prior to applying film to minimize face defects or sanding ripples from telegraphing through film;  Face and Back shall be glossy and  smooth to the touch without telegraphing bumps, bubbles, ridges or sanding dust

Glue: WBP (Weather/Boil Proof) Glue or Very High Quality Waterproof  Melamine glue used for all Core Plies. Plywood past 10 hr boil test without any signs of delamination or veneer or film separation.

Core: Poplar Core or Combi Core Veneer allowing no more than 5 pieces per ply with scarf or tight fitted taped joints. Interior core voids are limited to 3mm x 150mm. Core defects should be repaired, sanded and calibrated for thickness prior to film application.

Edge Sealing: Painting with phenolic glue, sealed with waterproof paint.

Packaging: packed by plywood and bundled with 11pieces of steel strips, each crate having wooden skid for use of forklift.